Biomass for heating and electricity generation

• ‘Biomass’ refers to a fuel that is produced by organic means.

• It is very nearly ‘carbon neutral’, limited by the need to transport the fuel.

• Biomass is produced in two formats:
          - As a fuel directly grown as an ‘energy crop’ eg wood; high yield
          - As a waste bi product eg agricultural residue; industrial waste and co-products

• Energy from biomass is generated at different scales:
          - Large / grid scale, from dedicated and co-firing power stations
          -  Medium / district scale power plants that provide energy to eg schools and housing  schemes
          -  Small / Domestic scale biomass boilers
 

 

The 'Carbon Cycle'

   
The central principle of biomass is that it takes carbon out of the atmosphere during growth and returns it when burnt.
the carbon cycle
 
A ‘closed carbon cycle’ is maintained where the biomass is harvested as part of a constantly replenished crop. Harvesting is followed by replanting, with the new growth taking up the C02 from the atmosphere released by the combustion of the previous harvest.
 

 

Large / grid scale biomass power plants

   
At the grid scale the Government is using the Renewable Obligation scheme to promote the development of large-scale integrated biomass generation. Because of the ease and low-risk of retrofitting fossil-fuel power plants to enable ‘co-firing’ (where both fossil and biomass fuels are used together), most of the initial expansion was in the area of existing power stations; But as the production and delivery of biomass at an industrial scale has become more refined, we are starting to witness a growth of the dedicated biomass power plant.
 

Examples

 
• The Eccenshall plant near Stafford generates 2.65 MW of electricity, enough to power some 2,000 households. The fuel is Miscanthus (an SRC, see below) grown within a 25 mile radius. The ash residue will be used as fertiliser on local farms.
 
• The world’s largest biomass power plant is being planned at Port Talbot. The 350MW station will be wood-burning with fuel being imported from sustainable sources in North America.
 

Fuels being used in large scale power plants

 
The Renewables Obligation defines a number of eligible renewable energy sources which include combustion of biomass in dedicated plant; co-firing of biomass and energy crops ; and pyrolysis, gasification & anaerobic digestion of biomass and biomass/waste blends.

Short-rotation coppice (SRC): Fast growing trees that provide the bulk of fuel being currently used. SRC can be used alongside coal in co-firing power plants.

Wood waste: The waste from forest maintenance, other timber industries and other crop residues is commonly transformed into compact fuel pellets.

Municipal solid waste: An increasing amount of waste previously destined to landfill is being used to generate both heat and power on a municipal scale.
 


 

Medium / district scale power plants (15 – 1000 kW)

 
Biomass district energy systems are those that feed energy from a centralised location to a number of units eg flats, houses, offices, industrial units. Heat generated centrally is piped to each building where it feeds a heat exchanger. Likewise, electricity generated in a CHP process is fed to each building as required.
 
biomass district heating
 
District heating and power systems are common in Europe. The UK is only beginning to progress from a long-term base of around 1% of heating provided by district heating systems, compared with, say, Denmark (60%) or even Germany (12%). But with the drive towards CO2 reduction and the development of boiler technologies, along with more secure fuel planning, district heating systems are becoming increasingly viable and popular. CHP systems on the other-hand are still in the early-days of development – though they offer much promise, experience of early systems, such as that at BedZED have been disappointing.
   

  District heating and power – pros & cons

Pro

Heating systems are an established and tested technology in Europe

Pro

District heating boilers are more efficient than individual domestic boilers

Pro

No individual fuel storage is required

Pro

Houses / premises can be individually metered

Pro

Maximises space within dwellings

Pro

CHP plant has the potential to save 25% of energy, compared to the separate generation of heat and electricity

Con

Setting up agreements for multiple private customers can be complex

Con

Systems require long-term planning for fuel supply and maintenance

Con

Higher initial capital investment compared with domestic boilers

Con

Boilers are large and expensive

Con

Around 10% of heat can be lost in distribution

Con

CHP systems are still being developed. It is not yet a reliable technology

Small / Domestic scale biomass boilers (typically 15 kW)

     

Biomass is beginning to compete in the domestic market alongside gas and oil as a fuel. Most boilers are imported from Austria where currently 80% of all boilers installed are wood pellet boilers. More costly than wood chip fuel boilers, wood pellet boilers are more like conventional boilers including self-igniting and self-regulating. They are also more efficient, typically burning at up to 94% efficiency. As the technology develops, domestic-scale CHP boilers are also likely to feature on the market in the future.

Small scale heating -  pros & cons

Pro

Heating systems are an established and tested technology in Europe

Pro

Ideal for where mains gas is unavailable

Pro

Can accommodate a range of fuels

Pro

Use of local fuels minimises transport and can contribute to the local economy

Pro

Combustion and supply of heat can be easily decoupled through use of hot water storage

Con

Small-scale CHP remains relatively undeveloped for widespread use

Con

Boilers are expensive

Con

The smallest boilers (10 - 12kw) can often be 2-3 x the designed capacity

Con

Biomass boilers can require more space than gas boilers - usually in excess of 1 x 1.5m

Con

Fuel storage and feed to the boiler are an extra demand

Con

Feed supply blockages to the boiler can be common

Con

Flues need regular cleaning

Con

Wood burning can become a pollution issue

Con

Fuel costs are variable - dependent on source, distance from supplier and quantity purchased

   

   

Wood fuel types

   

Wood chip – 10kW – 10MW

 
• More suitable for medium / large scale operations
• A local supplier is needed
• Quality tends to be variable
• Fuel reception design is key and can be expensive
• Fuel does not flow and is difficult to handle.
• Care should be taken when using recycled wood because of the risk of contaminates such as formica or melamine, plastics and paint.
 

Wood pellet – 10 kw – 1000kW

 
• More suitable for small / medium scale operations
• The fuel is usually made from compressed sawdust and wood shavings but can be made from most biomass material (eg straw, forestry residues and specially grown energy crops)
• Pellets are usually produced at an industrial scale, though developing technology is enabling smaller-scale production.
• There isn't' t yet a consistent quality of pellet in the UK. Pellets vary according to source. Care should be taken when using recycled wood because of the risk of contaminates.
• Pellets are more expensive than wood chip / logs.
• Sources are unlikely to be local – necessitating transportation over long distances – so adding to cost and carbon emissions.
• Fuel is delivered by blower – fuel storage is generally simpler and cheaper than for other wood fuels.
• Unlike other wood fuels, pellets ‘flow’ – resulting in simple delivery to combustion.
• Pellet quality is crucial – boilers can be ‘intolerant’ to certain sources.
  

Logs – 15kW – 70kW

 
• More suitable for small operations
• Logs are easy to handle.
• Logs are more often sourced from a known and existing supply chain.
• They can be produced from small scale woodland
• They need to be loaded manually at least once a day


 

Design considerations

   
• Capacity: Calculate peak heat loss (which in a district system will include distribution losses).
• Network design in district systems
• Wood fuel selection:
   - Either chip (including moisture and particle size), pellet or log
   - Availability and price
   - Wood fuel specification and boiler type
   - Wood fuel delivery and fuel store design
• Think carefully about where to locate plant in relation to the thermal / airtightness envelope - putting a wood-fired system within the envelope can lead to significant heat loss owing to its contribution to air leakage and thermal bridging.
• Space and access for biomass boiler plant
   - Fuel delivery, receipt, storage options and delivery vehicle needs
• Planning issues
   - Visual
   - Air quality: In smokeless zones, wood can only be burnt in exempted appliances.
   - Traffic
   - Noise
• User controls


 
 

Movies


Biomass: The basics

 

 


A walk around a 95kW wood-fuel boiler at the RJ Mitchell Primary School
   


 
Retro installing a domestic biomass boiler and radiator system
   


 
    

 

 

Further information


• The BioMass Energy Centre - ( www.biomassenergycentre.org.uk )
• The Log Pile Web site– an online database of wood fuel suppliers - (  www.nef.org.uk/logpile )
• Wood Energy Business Scheme - ( www.forestry.gov.uk/woodenergywales )

 

 Biomass boiler products on GreenSpec

 


Disclaimer

 

GreenSpec accepts no responsibility or liability for any damages or costs of any type arising out of or in any way connected with your use of this web site. Data and information is provided for information purposes only, and is not intended for trading purposes. Neither GreenSpec nor any of its partners shall be liable for any errors in the content, or for any actions taken in reliance thereon.

Share with: